modelRECKITVIPSAL
manufacturerRecmar
Weight:1,90 kg

Aluminum anode kit for Volvo Penta IPS 23172846

Recmar
Lieferung Thu 06. Aug - Mon 10. Aug 2026 **
24 months statutory warranty

Aluminum anode set for Volvo Penta IPS drives, complete with screws - corrosion protection for brackish and salt water.

Contact information according to Art. 19 EU GPSR

Postal address

RECMAR NEW HOLDING S.L.

Calle Jocelyn Bell, 26, Sector Can Alemany
08840 Viladecans (Barcelona)
Spain


Electronic address

E-Mail: [email protected]
Website: www.recmarineparts.com

Aluminum anode kit for Volvo Penta IPS 23172846

This sacrificial anode reduces galvanic corrosion on electrically conductive components in the water.

It is mounted on the underwater part, trim cylinder, heat exchanger or shaft. If the anode is removed too much, the protective effect is reduced and the base material can be attacked.

Component classification: aluminum sacrificial anode / corrosion protection anode

System function: galvanic corrosion protection on underwater or engine components

Compatible manufacturers: Volvo Penta

Compatible models: IPS-A, IPS-B, IPS-C, IPS-D, IPS-E, IPS-F, IPS10-A

Reference numbers:

  • VOLVO PENTA: 23172846
  • AFTERMARKET: RECKITVIPSAL

FAQ

What exactly is the task / function of the component?
The sacrificial anode sacrifices itself electrochemically to protect metal parts in the water that are at risk of corrosion from galvanic attack. Its effectiveness depends on electrical contact, correct material and sufficient free surface.

How do you recognize a defect / typical symptoms?
A defect in the true sense of the word is the wear and tear caused by consumption or an electrically insulated, overpainted or loosely mounted anode. Severe material degradation of the anode or traces of corrosion on neighboring components are then visible.

How do you check / test the component?
Residual mass, tight fit, bare contact surfaces and, if necessary, electrical continuity to the protected structure are checked. Paint, oxide deposits or growth on the contact surface significantly reduce the protective effect.

When should it be replaced?
The anode should typically be replaced at around half the material loss or earlier if it is loose and unevenly worn. The interval depends heavily on the type of water, the time it has been in place and external currents.

How do you check compatibility?
The OEM number, choice of material for fresh, brackish or salt water, shape, hole spacing, contact surface and installation location must be checked. The wrong anode material can lose its protective effect or be used up unnecessarily quickly.

Enter the first rating for this product. The text must consist of at least 2 letters.

Customers who bought this product also purchased

Marine-Discount24 Keychain Floating
Marine-Discount24 Keychain Floating
article nr.Schlüsselanhänger-MD24

The MarineDiscount24 key ring is more than just a promotional item - it is a practical safety accessory for anyone who is on or near the water.

2,09 EUR
(9)