Fuel hose 18-8114

• Fuel hose 18-8114

Fuel hose 18-8114

This line or connector carries medium between the associated components or establishes a secure hose connection.

It is installed in the fuel, water, oil or vacuum system depending on the design Brittleness, chafing or leaks cause pressure loss or leakage.

Component classification: Hose, line or connector - Check medium and installation location using serial number

System function: Delivery or connection of fuel, water, oil, air or vacuum

Compatible manufacturers: not specified

Compatible models: various models - Check serial number

Reference numbers:

• OEM / REFERENCE NUMBER: 18-8114
• AFTERMARKET: REC18-8114

FAQ

What exactly is the task / function of the component?
The component fulfills a constructive, sealing, guiding or connecting function within the associated assembly. The exact function is determined by the installation location and the system-related exploded drawing.

How can you recognize a defect / typical symptoms?
Defects are usually indicated by play, leakage, corrosion, dimensional deviation, assembly problems or loss of function of the adjacent assembly. Without an exact classification, the assessment must always be carried out via the installation situation and comparison with the old part.

How do you check / test the component?
Component condition, dimensions, surfaces, fits, damage and conformity with the removed part are checked. Depending on the design, a visual inspection, dimensional check, leak test or basic electrical test may also be carried out.

When should it be replaced?
The component should be replaced in the event of visible damage, corrosion, wear, loss of function or whenever the manufacturer specifies it as a disposable part. Preventive replacement is particularly useful for sealing and wearing parts.

How do you check compatibility?
The OEM number, exploded view, installation position, dimensions, plug or connection diagram, material and left/right or top/bottom design are important. The part number alone is not always sufficient when changing variants.