Propeller 3 aluminum 13-1/4 x 17R Solas Amita 2411-133-17

This propeller is suitable for the following outboards and sterndrives:

• Evinrude / Johnson
• 40 hp E-Tec (4-1/4 inch) from 2004
• 45 hp 2-cyl. Commercial from 1986
• 50 hp 3-cyl. Pleasure from 1994
• 50 hp E-Tec from 2004
• 55 hp 2-cyl. Commercial from 1980
• 60 hp 3-cyl. 2-stroke (4-1/4 inch) 1970-1971
• 60 hp 3-cyl. 2-stroke (4-1/4 inch) from 1986
• 60 hp E-Tec from 2004
• 60 hp 4-stroke from 1998
• 65 hp 3-cyl. commercial from 1984
• 70 hp 3-cyl. Pleasure (4-1/4 inch) from 1974
• 70 hp E-Tec (4-1/4 inch) from 2004
• 70 hp 4-stroke from 1998
• 75 hp 3-cyl. Pleasure (4-1/4 inch) 1978-1984
• 75 hp E-Tec from 2004
• 85 hp 2-stroke 1969-1980
• 85 hp 2-stroke 1991-1995
• 88 hp 2-stroke 1981-1996
• 90 hp 2-stroke from 1981
• 90 hp E90 DPL/DSL from 2006
• 90 hp E-Tec from 2004
• 100 hp 2-stroke 1979-1980
• 100 hp 2-stroke 1988-1993
• 110 hp 2-stroke 1986-1989
• 112 hp 2-stroke 1994-1996
• 115 hp 2-stroke from 1973
• 115 hp E115 DPL/DSL from 2006
• 115 hp E-Tec from 2004
• 120 hp 2-stroke 1986-1994
• 125 HP V4 1971-1972
• 130 hp E-Tec from 2004
• 135 HP V4 1973-1976
• 140 hp 2-stroke 1977-1994

• OMC Sterndrive (Z-drive)
• Model 400 (2.3L - 3.0L) 1978-1991
• Sea Drive 1.6L - 1.8L 1982-1990
• Cobra 2.3L - 3.0L 1985-1991 (not for SX)

• Aluminum with resistant black paint protection
• Propeller with integrated hub, no hub set required
• Number of blades: 3
• Diameter: 13-1/4 inch = 337 mm
• Pitch: 17 inch
• Direction of rotation: right
• For propeller shaft with 13 teeth
• Comparable with Evinrude 176214, 177131, 763463, 765183 (13-1/4 x 17)
• Solas No. 2411-133-17 Amita