Liqui Moly silicone sealant black 200ml 6185

• Liqui Moly silicone sealant black 200ml 6185

Particularly high-quality and easy-to-use silicone-based sealant in an automatic cartridge. No cartridge gun required. With excellent resistance to cold, heat and ageing. Remains permanently elastic and is resistant to chemicals, oils, etc. Temperature resistant from -65 °C to +260 °C (up to +315 °C for short periods).

• Resistant to loads and vibrations
• Permanently elastic
• enables a wide range of applications
• free from solvents
• formaldehyde.
• CFCS
• PCBS
• PCP
• good adhesion to vertical surfaces
• excellent chemical resistance
• excellent temperature resistance

Application:

The surfaces to be sealed must be clean, free of oil and grease and dry. Remove the cap and turn the cartridge tip through 90°. Apply material evenly and join parts immediately without flash-off time. After application, turn the cartridge tip through 90° again and press the cap onto the nozzle. Note: Insufficient adhesion is to be expected on substrates such as PP, PE, Teflon and bitumen. We therefore recommend carrying out an adhesion test before use.

Caution H229 Pressurized container: May burst if heated.H412 Harmful to aquatic life with long lasting effects. EUH208 Contains 3-aminopropyltriethoxysilane. May cause an allergic reaction.